Dongshen takes pride in introducing its high-performance Styrofoam Block Making Machine, specifically designed with advanced technology to provide top-tier EPS Moulding solutions for businesses worldwide. This machine is more than your ordinary moulding machine; it is a revolutionary approach to efficient and reliable EPS production. Our Automatic Styrofoam Block Making Machine showcases the synergy of innovation and engineering excellence, making the EPS Moulding process not only simpler but also cost-effective. It combines high-speed production with superior moulding precision, creating EPS blocks that meet exacting industry standards for quality and consistency. Having this machine in your production line signifies not only a robust capability to handle large-scale EPS Moulding tasks but also the assurance of output that adheres to the highest standards of quality, reliability, and sustainability. With our Automatic Styrofoam Block Making Machine, you can expect unmatched efficiency and productivity, reducing waste and maximizing the return on your investment. At Dongshen, we understand that the EPS Moulding industry continuously evolves. Thus, our machine comes equipped with the latest features that ensure adaptability to changing needs and requirements. Businesses trust us for their EPS Moulding needs because they know they aren't just purchasing a machine – they are investing in a solution that will keep them ahead in a competitive industry.

Introduction

Automatic styrofoam block making machine is an efficient EPS machine to make EPS blocks. EPS blocks can be cut to sheets for house insulation or packing. Popular products made from EPS sheets are EPS sandwich panels, 3D panels, inner and outer wall insulation panels, glass packing, furniture packing etc.
Automatic styrofoam block making machine can produce high density EPS blocks, working in fast cycle, and all blocks are straight and strong and with low water moisture. The machine can also make low density blocks with good quality. It can make high density at 40g/l and low density at 4g/l.
Automatic styrofoam block making machine complete with main machine body, control box, vacuum system, weighing system etc.
Automatic styrofoam block making machine advantages:
1.Machine is made of high-strength square tubes and thick steel plates;
2.Machine uses 5mm thick aluminum steam plates with Teflon coating. And under aluminum plate, bigger sized supports at more quantity are placed to avoid aluminum plate deform under high pressure. Aluminum plates doesn’t change form after ten years working;
3.Machine’s all six panels are through heat treatment to release welding stress, so that panels cannot deform under high temperature;
4.Machine with more steam lines to ensure steaming even in blocks, so block fusion is better;
5.Machine plates are with better drainage system so blocks are more dried and can be cut in short time;
6.All machine plates through rust removing, ball spraying, then do anti-rust base painting and surface painting, so machine body is not easy to get rusted;
7.Machine use smart piping system and steaming process, ensuring good fusion of blocks both for high density and low density;
8.Fast filling system and efficient vacuum system ensures machine fast working, each block 4~8 minutes;
9.Ejection is controlled by hydraulic pump, so all ejectors push and return at same speed;
10.Most components used in the machine are imported or famous branded products.

EPS styrofoam beads expanding machine

Item		Unit	PB2000V	PB3000V	PB4000V	PB6000V
Mould Cavity Size		mm	2040*1240*1030	3060*1240*1030	4080*1240*1030	6100*1240*1030
Block Size		mm	2000*1200*1000	3000*1200*1000	4000*1200*1000	6000*1200*1000
Steam	Entry	Inch	2’’(DN50)	2’’(DN50)	6’’(DN150)	6’’(DN150)
	Consumption	Kg/cycle	25~45	45~65	60~85	95~120
	Pressure	Mpa	0.6~0.8	0.6~0.8	0.6~0.8	0.6~0.8
Compressed Air	Entry	Inch	1.5’’(DN40)	1.5’’(DN40)	2’’(DN50)	2’’(DN50)
	Consumption	m³/cycle	1.5~2	1.5~2.5	1.8~2.5	2~3
	Pressure	Mpa	0.6~0.8	0.6~0.8	0.6~0.8	0.6~0.8
Vacuum Cooling Water	Entry	Inch	1.5’’(DN40)	1.5’’(DN40)	1.5’’(DN40)	1.5’’(DN40)
	Consumption	m³/cycle	0.4	0.6	0.8	1
	Pressure	Mpa	0.2~0.4	0.2~0.4	0.2~0.4	0.2~0.4
Drainage	Vacuum Drain	Inch	4’’(DN100)	5’’(DN125)	5’’(DN125)	6’’(DN150)
	Down Steam Vent	Inch	4’’(DN100)	5’’(DN125)	6’’(DN150)	6’’(DN150)
	Air Cooling Vent	Inch	4’’(DN100)	4’’(DN100)	6’’(DN150)	6’’(DN150)
Capacity 15kg/m³		Min/cycle	4	5	7	8
Connect Load/Power		Kw	19.75	23.75	24.5	32.25
Overall Dimension (L*H*W)		mm	5700*4000*2800	7200*4500*3000	11000*4500*3000	12600*4500*3100
Weight		Kg	5000	6500	10000	14000

case

Related video

---

• Previous:EPS pre-expander with second expansion
• Next:Good quality 6m EPS block molding machine

---

In a world where quality resonates with success, Dongshen’s robust and efficient Automatic Styrofoam Block Making Machine sets the standard for EPS Moulding. When you choose our machine for your EPS Moulding needs, you're choosing advanced technology, unparalleled efficiency, and the assurance of working with a company that values your success as much as ours. Step into the future of EPS production with Dongshen's Automatic Styrofoam Block Making Machine – and let us redefine what you thought was possible in the EPS Moulding world.