DongShen's Affordable EPS Shape Molding Machine for Perfect Floor Heating Panels
Operation process
Manually place the EPS panel at the corresponding position on the tray --- press the start button --- the laminating frame automatically presses down --- the electric furnace oven automatically moves forward --- the heating time is timed --- the tray time delay enters the timing end --- the tray automatically enters the timing end --- the heating time is timed out --- the tray automatically rises to start the blistering molding --- the electric furnace oven moves backward --- the cooling time is timed out --- the laminating frame automatically rises --- the tray automatically drops --- the automatic sheet pulling --- the tray drops into place --- the tray Automatically move out to the initial state - manually insert the second EPS panel
Functional design and features
1. Pulling function: It adopts the form of frequency converter, variable frequency motor, and reducer to pull the plate. The output force is large, and the pulling speed can be adjusted at will. The encoder is used to control the pulling length, resulting in high precision of the pulling length.
2. Heating brick temperature control method:
Standard configuration: It adopts a two wire embedded far infrared ceramic heating brick for heating, with a heating brick size of 120cm square. The heating power of each heating brick can be independently controlled to achieve uniform temperature throughout the layout, and any heating brick can be turned off.
3. Automatic flattening function: After the EPS panel is coated with film, due to the cooling shrinkage of the film, the EPS panel protrudes and deforms towards the uncoated side. This machine is equipped with horizontal and vertical automatic flattening mechanisms at the discharge point to flatten the coated EPS panel horizontally and vertically.
4. Oven forward and backward movement function: The electric furnace oven adopts an automatic forward and backward movement mode, which can ensure that the plastic sheets are not affected by the preheating of the oven.
6. The width of the guide rail spacing can be adjusted: according to different sizes of modules, or manually adjust the distance between the two slide rails according to the width of plastic sheets to meet production requirements.
7. Product mold tray forward and backward movement function: The tray for placing the EPS panel to be coated is moved forward and backward. When placing, the tray is moved outside the machine, and the operator can easily place the EPS panel outside. The tray design has a delayed entry function, and the plastic sheet is heated and softened before entering, reducing the deformation caused by long-term heating of the foam board.
8. Replaceable function of the mold plate: the mold plate of different specifications and sizes needs to be replaced when the eps foam plates of different specifications and sizes are coated. The replaceable function of the mold plate realizes the multi-purpose of one machine.
Length | 800~1380mm |
Width | 600~960mm |
Height | 100mm |
Sheet thickness | 0.03~2mm |
Working speed | 2~3 panels per minute according to the different thickness of sheet |
Power | Pneumatic |
Machine overall size | 9200*3300*2100mm |
Weight | 4.8T |
case
Related video
Adding to its high efficiency, the electric furnace oven retracts while the cooling time commences. Once the cooling time elapses, the laminating frame rises automatically. Simultaneously, the tray descends and pulls the sheet automatically, transitioning back to its initial state, ready to receive the next EPS panel. The EPS Shape Molding Machine from DongShen embodies the ideal blend of practical design and cutting-edge features. It ensures seamless functionality, and its efficiency is a testimony to our commitment towards delivering the highest quality machines to our customers. So, if you are looking for a superior EPS Shape Molding Machine that adheres to the optimum standards of quality, durability, and performance, DongShen has got you covered.
Privacy settings