Gabatar da jihar - of - The - Art Eps Eps cike bindiga, musamman da aka tsara don amfani da shi tare da akwatin kifi na aluminium mold. Wannan kayan aikin an saita na jujjuyawa hanyar da siffar injayen mold suna aiki da kai da kuma donghshen a kan wannan bidi'a. EPS cike bindiga yana aiki ba tare da kwayar kifin kifi ba da launi na aluminium mold, yana canza aiwatar da abin da aka kirkira waɗannan molds ɗin. Tsarinmu yana tabbatar da daidaito da inganci a kowane yanki, taimaka wa kamfanin ku samar da sama, hanyoyi masu inganci. Akwatin Kifi na Aluminum Mold, lokacin da aka yi amfani da shi tare da EPS cike bindigogi, yana ba da tsararren fa'idodi. Mold an tsara shi don kula da fom da aminci ko da a cikin matsanancin yanayi, tabbatar da daidaituwa da babban samfurin. EPS cike bindiga an tsara shi ne musamman don cike waɗannan molds tare da kayan EPS, yana ba da daidaitaccen da amincin a kowane mataki na aiwatar. Wannan haɗin ba kawai yana inganta inganci ba amma kuma yana rage sharar gida kuma yana ƙara yawan daidaito na tsari.

Bayanan samfurin

Ana amfani da kayan EPS wanda za'a yi amfani da shi don dacewa da fasalin EPP siffar inforing inji. Hakanan muna da EPS ɗin da ke cike bindiga don EPS ɗin toshe mold.

Zamu iya samar da masu girma dabam da bayanai masu yawa suna cike bindigogi, kamar nau'in cika bindiga na gama gari, a gaban karamin shugaban gun, nau'in Jamusanci cike bindiga da sauransu.

Barka da ka tuntuɓi mu kai tsaye idan kuna da wanibincike.

Nau'in nau'in gun

Sammanci	D	d	L	Diamita diamita	Nuna ra'ayi
	22	14	80; 100; 120; 150; 180; 2000; 2000 .........	32	Tsawon 150 da 180 sune samfurin yau da kullun.Ciyar da bututun iska ta iska 1/4
	25	16		32
	28	18; 20		32; 38
	30	20		30; 38
	32	20		38
	35	20		38
	36	20		38

Air gaban karamin shugaban sa ido

Ba da daɗewa	D	L	D1	d	L1	Diamita diamita	Nuna ra'ayi
	30	150; 180	14	10	25	32	Ciyar da bututun iska ta iska 1/4
	30		16	12
	30; 32		20	16
	35		20	16
	36		20	16

Nau'in Jamusanci cike bindiga

Sammanci	D	L	D1	d	L1	Diamita diamita	Nuna ra'ayi
	50	310	20	16	25	35	Landrel..Feeedar bututun iska ta iska 1/4
		410	20	16	25
		510	20; 24	16; 20	40

Ya isa

Sarrafa bita

Mai dangantaka mai dangantaka

---

A baya:EPS cike bindiga don incarfin mold

Next:Mallaka

---

A Donghenhen, muna faɗin kirkirar da inganci. Eps ɗinmu cike bindiga da kuma rakiyar kifin kifin namu suna da alaƙa da aikinmu, kuma mun yi imani za su fanshi yadda kamfaninku ya gudanar da yadda kamfaninku ya yi aiki. Gano fa'idar daidaito da inganci tare da Dongshen kuma canza tsarin samarwa yau. Samfurinmu ya fi kayan aiki; Yana da hannun jari ga inganci, inganci, da bidi'a. A cikin hanyar fasahar fasaha da ƙira, zaku sami gaghuhen, jagorantar masana'antar tare da juzu'in da juyin juya halinmu na gun da kuma akwatin kifi na aluminium mold. Kwarewa da ikon canzawa na daidaito tare da mu. Kwarewa da bambancin Donginhen.