Hoe om EPS -vorm te installeer tot EPS vorm vormmasjien

1. Push the mold with the filling gun and ejector pre-installed into the EPS shape molding machine, and the designated operator will lift the mold;

2. Fix the fixed mold and moveable mold pressing plate, each mold has no less than 20 pressing plates, and the pressing plates are installed evenly. Installeer dan die materiaalvulgeweer, ejector, materiaalpyp, stoompyp, afvoerpyp en waterinlaatpyp in volgorde.

3. Klem die vorm vas, verstel die vaste - bewegende vormsteunplaat en die vorm van die vorm styf.

4. Mould support plate requirements, more than three support plates are installed for molds larger than 1400*1700MM (including 1400*1700MM) size, and no less than two mold support plates smaller than 1400*1700MM

5. Maak die takelring van die hyskraan los en dryf die hyskraan na die einde van die toerusting.

6. Three-piece mold installation sequence: A: First, lift the fixed mold to fix the fixed mold pressing plate, with no less than 4 pressing plates on each side. B: Lig die beweegbare vorm op om die vaste vorm met die hand te pas, en die gaping is nie meer as 1 mm nie. C: Maak die vorm toe om die beweegbare vormdampkamer en die vorm volledig te pas. D: After installing the moveable mold, the sealing plate and pressing plate should be no less than 3 pieces on each side, and install them evenly. F: Maak die vorm volledig oop om die beweegbare vorm van die vorm van die vorm van die vorm te installeer, elke kant is nie minder nie as 4 persplate en installeer dit eweredig.

7. In the process of installing the mold, the installation tools/mold spare parts/equipment accessories cannot be placed directly on the ground, and they need to be placed in containers for classification.

As u probleme ondervind tydens die installasie van die vorm, kontak die verskaffer betyds