Litekanyetso tsa sehlooho tsa sehlahisoa

Litlhaloso tse tloaelehileng tsa lihlahisoa

Ts'ebetso ea lihlahisoa tsa sehlahisoa

Mefuta ea ente ea StyroFam e atolositsoeng e atolositsoeng e atolositsoeng teng pele ho feta moo - Ts'ebetso ena e kenyelletsa mehato e 'maloa e nyarosang ho kenyelletsa le litokisetso tsa lintho tse bonahalang, meralo ea lintho tse bonahalang le sethala, ho bopa, ho futhumatsa le ho phumula. Ho tšepahala ha lihlahisoa tsa sephetho li itšetleha ka mocheso o nepahetseng le taolo ea khatello, o laela hore likarolo tsa tšepe li be le lerata la lieta. Ho ea ka lithuto tse tsitsitseng, tšebeliso ea theknoloji ea CNC e ntlafatsa ho nepahala le bophelo bo bolelele ba hlobo, e fana ka boleng ba tlhahiso ea tlhahiso.

Maemo a Kopo ea Sehlahisoa

Metsoako ea ente ea styrofeta e fumana lits'ebeletso tse pharalletseng indastering e fapaneng ka lebaka la bobebe ka lebaka la bobebe, mahlomoleng le tšusumetso - E sebelisoa esale pele ka ho boloka thepa e fokolang, thepa ea kaho joaloka likhahla tse kentsoeng, le likarolo tsa koloi tse ikemiselitseng ho ntlafatsa ts'ebetso ea mafura ka phokotso ea boima. Patlisiso e bonts'a hore ntšetso-pele e tsoelang pele ea li-eps Lisebelisoa li ntse li eketseha ka lisebelisoa tsa bona tsa thepa le Eco - likopo tse nang le botsoalle.

Sehlahisoa kamora - Tšebeletso ea thekiso

Re fana ka limpho ka mor'a - Tšehetso ea thekiso, ho kenyelletsa le thuso ea tekheniki, tlhokomelo ea hlobo le lits'ebeletso tse kenyelletsang kamoo ho hlokahalang. Sehlopha sa rona se inehetseng se tiisa hore mathata afe kapa afe a lihlahisoa tsa sehlahisoa, sehlopha sefe kapa sefe, se netefatsang leqeba le se nang thuso le bakeng sa bareki ba bohlokoa.

Tsamaiso ea Lihlahisoa

Re netefatsa lipalangoang tse sireletsehileng tsa li-eps tsa rona tsa li-eps tsa rona li sebelisa mabokose a kopaneng a Plywood a etselitsoeng ho thibela tšenyo nakong ea maeto. Re lumellana le bafani ba nang le tsebo ea ho fana ka lihlahisoa hantle lefatšeng ka bophara.

Melemo ea sehlahisoa

• Ho hloka botsitso ka ntle ho ho sebelisa tsa pele - lisebelisoa tsa sehlopha
• Sephiri se reng le cnc mochini oa cnc
• E SEBELISANG HO LITLHAKISO TSA BOPHELO
• Ho sebetsa hantle ka mokhoa o matlafatsang tlhahisong
• Linako tse potlakileng tsa phetoho

FAQ ea sehlahisoa

• Ke eng e etsang hore li b eps tsa hao tse hlahelletseng?
  Re ile ra qala ho hlakoloa CNDing ea CNC.
• U etsa bonnete ba boleng ba mats'oao a hau joang?
  Ts'ebetso ea rona ea boleng ba boleng ba boleng ba boleng bohle e tloha tlhahlobo ea ho qetela ho isa tlhahlobong ea ho qetela, e netefatsa hore hlokolosi e 'ngoe le e' ngoe e kopana le maemo a rona a phahameng pele ho nehelana.
• Linako tsa lead ke life tsa limmapa tsa hau tsa EPS?
  Linako tsa rona tsa ho ikoetlisa li fetoha ho tloha matsatsing a 25 ho isa ho 40, ho latela ho rarahana ha morero.
• Na lihlomo tsa hau tsa meth tsa hau li ka sebetsana le libopeho tse thata?
  E, baenjiniere ba rona ba nang le boiphihlelo ba ka raloa le ho hlahisa hlobo bakeng sa libopeho tse thata le litlhaloso tse phephetsang.
• Na u fana ka tloaelo?
  Ehlile, re ka kenya limmapa tsa rona ho fihlela litlhoko tse khethehileng tsa bareki ba rona, ho kenyelletsa boholo le boholo ba meralo.
• Ke poso efe eo u e etsang - Likhetho tsa ho sebetsa li fumaneha?
  Re fana ka ts'ebetso e eketsehileng e kang ho koahela kapa ho khaola ho ntlafatsa li-aesthetics le ts'ebetsong.
• Mokhooa oa styrofoam ke ency ea styropaam?
  Re ikemiselitse ho na le mekhoa e nang le boikarabello ba leihlo, re sebetsa le bareki ho fumana likhetho tse nchafatsang le tse bitsitsoeng.
• Na mehloli ea hau e lumellana le mechini ea machabeng?
  E, litšeho tsa rona li etselitsoe ho lumellana le metjeko ea eps trubally, ho kenyelletsa le tse tsoang Jeremane, Japane le Korea.
• U sebetsana joang le thepa ea thomello?
  Rona balekane le li-firms tse tšepahalang ho netefatsa phano e bolokehileng le e sebetsang lefatšeng ka bophara.
• Ke tšehetso efe e fumanehang - Ho reka?
  Sehlopha sa rona se fana ka tšehetso ea tekheniki e tsoelang pele ea tekheniki, e netefatsa ts'ebetso e bonolo le ho boloka linate tsa rona tsa mold.

Lihlooho tse chesang tsa sehlahisoa

• Karolo ea Mochini o tsoetseng pele ea CNC ho ntlafatsa mafura a limmapa
  Sebakeng sa sekhobo sa StyroFam sa styroFam sa ho qhekella, ho nepahala le katleho ho fanoe ka mechini ea CNC e ka senngoa. Mechine ena e lumella meralo e rarahaneng le ho mamella ka thata, e tlatsetsang ho tšepahala ebile ho phela nako e telele ea mafura a eps hlobo. Joaloka mofani ea etellang pele, re ntse re tsoela pele tsetela ho ba khaola - The Edge Cnc Technology, re re nolofalletsa ho fihlela litlhoko tse fapaneng tsa moreki oa rona oa lefatše.
• Ho sebetsana le Mathata a Eco - tlhahiso e botsoalle e mosa StyroFam
  Joalokaha matšoenyeho a tikoloho a ntse a eketseha, indasteri e tobana le phephetso ea ho tsamaisa lihlahisoa tse tšoarellang tsa styrofam. Lipolelo tsa thepa e nchafalitsoeng le mefuta e meng ea biodegrada e ka pele ho phetoho ena. Karolo ea rona ea ho ba morekisi e kenyelletsa bareki ba tataisang bareki ba ho iphelisa, ba fana ka maikutlo le tharollo hore pele honoe eco -.
• Phapang ea StyroFam Indeeng sa sejoale-joale
  Thepa e ikhethang ea StyroFaam e etsa hore ho belehe likarolo tse ngata, ho tloha ho pakang le kahong ho thepa ea likoloi le bareki. Litšoaneleho tsa eona tse bobebe tsa tlhaho le litšoaneleho tse khutsitseng tsa ho khanna le ts'ebeliso. Joaloka mofani ea tšepahalang, re tiisa hore litšeho tsa rona li ts'ehetsa tšebeliso ea lintho tsena tse fapaneng, re tsamaisa nts'etsopele e tsitsitseng ea indasteri.

Tlhaloso ea setšoantšo