Boitšoaro bo botle bo phahameng le factor ea Dongshen - Polystyrene Pre - Exereder
Kenyelletso
Ka hare ho li-eps tse tala, ho na le khase e bohloko e bitsoang tloutane. Kamora ho thengoa, ponnete e qala ho hola e le boholo ba linaoa e hola e hola haholo, sena se bitsoa ho hola. Li-bead tsa EPS li ke ke tsa sebelisoa ho etsa li-block kapa lihlahisoa tsohle, libalaka tsohle li hloka ho atolosoa pele ebe u etsa lihlahisoa tse ling. Bokhopo ba sehlahisoa boa khethoa nakong ea ho hlola ho penta, ka hona taolo ea lefupo e entsoe ho se sebetse hantle.
Ho ba le tokelo ea Batch ea Pontyrene Pre - Exetermer e Fumane ho Theha Li-EPS tse Tlang ho Tsitsoaneng e hlokahalang. Ho tla thepa le ho hola ho etsoa batch ka sehlopha, kahoo se bitsoa batch pele - Exedier. Ka boeona ea polystyrene Beads mochini ke mofuta oa mochini o ikemetseng oa eps, mehato e metelang, e opang le ho atoloha le ho atoloha le ho atoloha le ho atoloha le ho atoloha
Ho bapisa le ho tsoela pele ho sebetsa hantle, theko e ntle ka ho fetisisa ea theko ea polystyrene e ka fana ka mokhoa o nepahetseng haholoanyane, ts'ebetso e bonolo le ho boloka matla.
Ts'oaetso tse phahameng tsa Batch ea Pontyrene Pre - Exewer
Sebati se phahameng sa ho nepahala ha litch polystyrene pree - Monyetla oa ho atolosa:
1.Batch Prexpander AdcPTS Mitsubishi PLC le Winview Touti Tšoantseng Screen ho laola ho sebetsa ka botlalo;
2.Batch ea H behang sebelisa sistimi ea vacuum ho fetisa thepa e tala ho tloha tlase ho ea tlase ho isa holimo le linotlolo tse bonahalang;
3. An ho tlatsa matla a mabeli a holimo bakeng sa ho tlatsa matla a mangata, ho boloka matla le ho potlaka ho tlala;
4.chine katoloso ea pele le keketseho ea bobeli e sebelisa Meter ea FT650 e lekantsoeng ho laola, ho nepahala ha 0.1g;
5.mandine e sebelisa khatello ea theko ea Majapane ho netefatsa kenyelletso ea mouoane;
6.chine le ho opa le ho omella ka kotloloho. Ho sebelisa Valve e nyane ho ela ho fihlela mocheso o itseng o ntse a futhumatsa, ho joalo le ka ho atolosoa hantle;
7.maine laola khatello ea moea le khatello ea moea hantle ka kamoreng ea ho hola, ho mamella lintho tse hlokofatsang ka tlase ho 3%;
8.Mramate skhaititing shaft le kamore e ka hare ea ho qala ka tlung li entsoe ka SS304;
9.STeAM proleotal vale, valve ea villal ea moea le korean vibration ke ea boikhethelo.
Eps StyroFam Beads Mochini o eketsehang
FDS1100, FDS1400, FDS1660 e phahameng ea FDS1660 Pre - Polystyrene Pre - Exereder | |||||
Ntho | Yuniti | Fds1100 | FDS1400 | Fds1660 | |
| Mokatong oa katoloso | Bophara | mm | Φ1100 | Φ1400 | Φ1660 |
| Buka | M³ | 1.4 | 2.1 | 4.8 | |
| Bophahamo bo bohlokoa | M³ | 1.0 | 1.5 | 3.5 | |
| Steam | Ho kena | Inch | 2 '' (DN50) | 2 '' (DN50) | 2 '' (DN50) |
| Tšebeliso | KG / Cycle | 6 - 8 | 8 - 10 | 11 - 18 | |
| Khatello | Mpa | 0.6 - 0.8 | 0.4 - 0.8 | 0.4 - 0.8 | |
| Moea o hatelletsoeng | Ho kena | Inch | Dn50 | Dn50 | Dn50 |
| Tšebeliso | m³ / potoloho | 0.9 - 1.1 | 0.5 - 0.8 | 0.7 - 1.1 | |
| Khatello | Mpa | 0.5 - 0.8 | 0.5 - 0.8 | 0.5 - 0.8 | |
| Drainage | Port | Inch | Dn100 | Dn125 | Dn150 |
| Tlasa koung ea drain | Inch | Dn100 | Dn100 | Dn125 | |
| Tlas'a koung ea pokello | Inch | Dn80 | Dn80 | Dn100 | |
| Kenya | 4G / 1 230g / h | 4G / 1 360g / h | |||
| 10g / 1 320g / h | 7g / 1 350g / h | 7g / 1 480g / h | |||
| 15g / 1 550g / h | 9g / 1 450g / h | 9g / 1 560g / h | |||
| 20g / 1 750g / h | 15g / 1 750g / h | 15g / 1 900g / h | |||
| 30g / 1 850g / h | 20g / 1 820g / h | 20g / 1 1100g / h | |||
| Lisebelisoa tse tsamaisoang ke thepa | Inch | 6 '' (DN150) | 8 '' (DN200) | 8 '' (DN200) | |
| Matla | Kw | 19 | 22.5 | 24,5 | |
| Letsoalo | Kg / m³ | 10 - 40 | 4 - 40 | 4 - 40 | |
| Ho mamella letsoalo | % | ± 3 | ± 3 | ± 3 | |
| Boholo ba bongata | L * w * h | mm | 2900 * 4500 * 5900 | 6500 * 4500 * 4500 | 9000 * 3500 * 5500 |
| Boima | Kg | 3200 | 4500 | 4800 | |
| Bophahamo ba kamore boa hlokahala | mm | 5000 | 5500 | 7000 | |
Nyeoe
Video e amanang le
Ho nepahala ho phahameng ha rona pele - Sena se lumella ho tsamaea hantle pele - ho eketseha ha morero leha e le lefe, ho fella ka sehlahisoa sa Qeto e latelang bakeng sa boholo, letsoalo le netefalitsoeng le sebopeho. Sebaka se phahameng se phahameng ba Dongshen Batch Polystrene Pre - Litlatsetso tsa Ntlamo Tsa Rona tsa ho isa Indasteri - Lithaba tse etellang pele. Tetlabelo ea rona ea Deps Reps Lay Motheo Bakeng sa Tsela e Tšoanang ea Polystrene Pre - Ho Atoloha mosebetsing, ho sebetsa hantle le ho laola ts'ebetso ea tlhahiso. Tseba Phapang ea EPS ea Eps - Polyyrene Poly Polystyrene Pre - Exereer - Mohlala oa ho nepahala ho Theiloeng pele ts'ebetso e phahameng ea ts'ebetso indasteri ea Polystyrene.
Litlhophiso tsa lekunutu